10/100Mbps PoE Industrial Fiber Switch 4 Port
Specification of Industrial PoE Switch
| Product Name | 10/100Mbps Industrial PoE Fiber Switch (2F+4TP) |
| Model No. | IM-FP244FE |
| Port | 2 x 100Mpbs SFP ports
SM: 1310 nm/1550nm, 20Km; 1490nm/1550nm, 40~120Km
MM: 1310nm, 2Km
4x10/100M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Switching features | Transmission mode: storage and forward
System bandwidth: 1.2Gbps (non-traffic jam) |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m)
100BASE-TX: CAT5 or above shielded twisted pair(≤100m)
SFP port,transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs | Power, network, fiber |
| Power supply | PoE power supply input voltage: 48V (max 52V) Single PoE power supply output power: 30W (port 1~4) Total budget: 120W PoE output voltage: 48V Reverse connection: support PoE Wiring: PoE Wiring |
| Environment | Working temperature: -40°C～75°C Storage temperature: -40°C～85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing |
| Industry Standards | ESD: IEC61000-4-2, ±15KV air, ±6KV contact EFT: IEC61000-4-4, General ±6KV Surge: IEC61000-4-5, Differential ±2KV, Common±6KV |
| Certification | CE-EMC: EN 55032:2015+AC: 2016+A1:2020+A11: 2020 EN 55035:2017+A11: 2020/EN IEC 61000-3-2:2019/A1: 2021 EN 61000-3-3: 2013/A2: 2021/AC:2022 CE-LVD: EN IEC 62368-1: 2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B(Class B) ANSI C63.4: 2014 |
| Mechanical information | Shell: Corrugated metal shell, IP40 grade level Dimension: 114*93*35mm Mounting method: Din-rail/Wall mounting Weight: 0.35Kg/0.45Kg(Net/Gross) |
| Warranty | Replacement within 1 year; 3 years repairing |
Introduction to Olycom Fiber Switch
- Supply active PoE(DC48V) to PoE IP cameras, WAPs etc. through Cat5 or above copper cable
- 2x100Mbps Auto-sensing SFP fiber ports
- 4x10/100Mbps Auto-sensing RJ45, IEEE 802.3af/at power on to 1~ 4 ports
- Detect the PoE modes(Non-PoE, 802.3af/at compliant) of connected electrical equipment
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- DIN rail or Wall installation
- Power range up to 100 meters
- Comply with FCC and CE standards
- A store-and-forward switching mechanism
- Operating environment temperature: -40°C～75°C
Application of CCTV PoE Switch
Dimension and Mounting
Accessory
| Industrial Optical Module |
| OSPL1E06D-85 | 100BASE-FX(850nm) |
| OSPL1E06D | 100BASE-FX |
| OSPL1E20D | 100BASE-LX |
| OSPL1E40D | 100BASE-EX |
| OSBL1E20D-35 | 100BASE-BX-U(TX 1310 RX1550) |
| OSBL1E20D-53 | 100BASE-BX-D(TX 1550 RX1310) |
| Industrial DIN Power Supply |
| IM-DAC220/DC48V2.5A | AC220V to DC48V2.5A, -40～70℃ |
| IM-DAC220/DC48V5A | AC220V to DC48V5A, -40～70℃ |
| IM-DAC220/DC48V10A | AC220V to DC48V10A, -40～70℃ |
FAQ
1, What chip is it based?
Olycom: Realtek
2, Can I customize it?
Olycom: Yes
We support OEM services like logo, model name, label, PVC mask and product parts(mounting kit, power terminal block etc.)
3, Can I connect it with 10/100M devices?
Olycom: Yes
All ports are 10/100/1000M auto-sensing
4, Is it managed?
Olycom: No
Its just simple plug-and-play, but we have a managed model(IM-FP244GM)
Product Tags:
|
|
Industrial Unmanaged PoE Switch Fast Ethernet SFP Fiber Rugged Network 120W DC48V Images
|
